Solder programming connector and cable

JP4 is intended for the in system programming of the MCU. The pinheads need to be soldered. The result should look something like this:

---

The ISP connector on the PCB has not the default pin sequence of a standard programmer like the PICkit 2. To use a standard programmer you have to build a adapter cable using the table below.

JP4 pin	MCU pin	PICkit 2 pin
1	28 (ICSPDAT)	4
2	27 (ICSPCLK)	5
3	19 (VSS)	3
4	1 (~MCLR)	1
5	20 (VDD)	2

Example ISP cable: